Wall Mount Gas Leakage Detector Kitchen Smoke Alarm Sensor with 12V Output

Quick Detail:

1. Working voltage: 12VDC
2. Working current: < 100mA
3. Working environment: - 10 degree ~ 50 degree
4. Work humidity: Less than 97%
5. Alarm volume: 10 feet of 75 db

Description:

Gas detector main installation in kitchen, effectively prevent flammable gas leak endanger master life, the front end of sensors to detect when flammable gas internal voltage circuit can produce change, the change process can convert control signal processing circuit issued a warning signal.

Specifications:

Application

Mounted on the wall or cabinet, about 30cm above the ground for LPG or about 30cm

below the ceiling for coal gas and natural gas use.

Ventilation hole showed as sketch map should be installed down.

The equipment needs 3--5 minutes for starting up sensor. The green LED on in normal mode.

When the ignitable gas is detected, the red indicator shall be flashed with “di-di-di”

alarm sound until the ignitable gas disappears.

If the sensor is invalid, the yellow indicator will be flush and with “di-----” sound

Continues When the alarm is alarming, press down the button, the alarm stop to alarm. Loosen

the button then the alarm also is alarming if have the ignitable in the room.

Attention

Install firmly to avoid impact and drop;

Don’t let dust and oil block the ventilation slots;

Don’t install product near hot, humid and oiling sources. Don’t install it near window

or fan, where leakage gas can be quickly disappeared.

Monthly checking if equipment can work well by pushing a little gas from a cigar